Comber
Noil
From the combing frame — the short fibres pulled out to make finer yarn.
Becomes nonwovens, open-end yarn, and blended felt.
In a spinning mill, the fibre that falls to the floor is called waste. We have spent seventy-five years proving that word wrong.
What one mill discards, another mill spins into yarn. Comber noil, carding waste, droppings, pneumafil — each has a second life waiting in an open-end rotor. Mahaveer is the link that carries the fibre from the mill that is done with it to the mill that needs it. That link has not broken since 1949.
Seven by-products move through our hands. Each leaves one mill as a loss and arrives at another as a raw material. Drag, scroll, or follow the fibre.
From the combing frame — the short fibres pulled out to make finer yarn.
Becomes nonwovens, open-end yarn, and blended felt.
From the carding cylinder — tangled fibre cleaned off the wire.
Becomes coarse yarn, mattress wadding, insulation.
From the revolving flats of the card — dense with trapped neps and dust.
Becomes reclaimed fibre for low-count spinning.
From the opening line — trash, seed and short fibre beaten out of the bale.
Becomes recovered lint and oil-absorbent stock.
From the suction system of the ring frame — fine broken roving drawn away by air.
Becomes high-grade open-end yarn — near-first quality.
From the ring frame — soft, hard and roving waste from spinning.
Becomes re-spun yarn, cleaning wipers, cotton batting.
From rotor spinning — the final by-product of the recycled loop.
Becomes yarn again, and the loop closes.
The loop only matters if it turns at volume. Ours moves the by-products of an entire industry through a single point in Indore, and out across the mill towns of India.
A business older than the modern Indian textile industry it serves. Read the axis left to right; the fibre has been moving the whole time.
Selling by-products from a spinning mill, or sourcing feedstock for open-end yarn? Start the conversation. We reply the way we have since 1949 — plainly.
Comber Noil · Carding Waste · Flat · Blowroom Droppings · Pneumafil · Ring & Open-End Waste